Component preparation
Organize the blade, shaft, handle and connection parts required by the selected paddle specification.
Paddle manufacturing / Huizhou, China
Paddle manufacturing from prepared components to controlled production
Follow the working stages behind an approved paddle order—from component preparation and assembly to product checks and packing.
Established2011
Factory area10,000+ m²
Team60+
Manufacturing scopeOEM / ODM
01 / Manufacturing capabilities
The work behind a production-ready paddle
Manufacturing begins after the product direction is clear. Buyers can review our paddle product range, including SUP, kayak, canoe and dragon boat paddles. Each operation is tied to the selected model, material, dimensions and approved appearance.
Shaft processing
Prepare shaft components and section formats for the dimensions and connection details defined for the model.
Blade production
Produce blade components according to the selected model, material and approved product requirements.
Graphics and finish
Apply agreed colors, artwork positions and visible finish requirements to the approved reference.
Assembly
Bring the specified components together and check fit, alignment and handling at the relevant stage.
Inspection and packing
Review the finished product against the approved reference before protection, labeling and carton preparation.
02 / Production process
Release the reference. Then move the order stage by stage.
The approved sample and written specification connect product development with repeatable production. Changes should be identified before the order moves into the relevant manufacturing stage.
- 01
Release the specification
Confirm the model, dimensions, materials, construction, artwork and packaging reference.
- 02
Prepare components
Group the required blades, shafts, handles, connectors and other model-specific parts.
- 03
Process and finish
Complete the applicable molding, shaft work, surface treatment, color and graphic steps.
- 04
Trial assembly
Check component fit and assembly details before the order moves through the full production stage.
- 05
Production assembly
Assemble and handle products according to the released specification and approved sample.
- 06
Inspect
Review the agreed dimensions, alignment, material condition, surface, bonding and print details.
- 07
Protect and pack
Apply the confirmed product protection, labels, individual packing and carton requirements.
03 / Quality control
Inspection points should match the product and the approved reference
Quality control is most useful when both teams agree what is being checked, at which stage and against which reference.
CheckpointWhat is reviewedReference
01SpecificationModel, dimensions, materials and component configurationReleased specification and approved sample
02AssemblyFit, alignment, connection points and supplied componentsModel-specific assembly reference
03AppearanceSurface condition, color, artwork position and print finishApproved appearance reference
04ConstructionMaterial integrity and bonding points where applicableAgreed inspection points
05PackingProduct protection, labels, quantities and carton detailsApproved packing requirements
04 / Testing
Define the test before production—not after the result
A test requirement is useful only when the method, sample condition, acceptance criteria and reporting need are clear. Buyers should provide their required standard or procedure for review with the product specification.
- Test object
- Identify the complete paddle, shaft, blade, connection or other component being evaluated.
- Test condition
- State the load, direction, fixture, duration, environment or repeated action required.
- Acceptance criteria
- Define the measurement, visible condition or pass/fail requirement expected by the buyer.
- Record needed
- Confirm whether the project requires readings, photos, a checklist or another agreed record.
05 / Factory
Manufacturing support from Huizhou, China
Vision Industries Co., Ltd. connects product review, component preparation, production handling, inspection and packing through one manufacturing team. Paddles are the primary product direction, with additional support for hydrofoil sets, surfboard bags and covers, and kayak accessories.
Learn about Vision SportsCompanyVision Industries Co., Ltd.
LocationHuizhou, Guangdong, China
Project contactAaron Deng · Director
Address
Building 1, Phase 2, Xinli Kangle Chuangcheng Smart Industrial Park, Shuikou Street, Huicheng District, Huizhou, Guangdong, China.
Approved sample→Released specification→Production stages→Inspection→Packing
Manufacturing FAQ
Questions before production planning
Use these answers to prepare the product and inspection information our team needs before reviewing an order.
What does the manufacturing page cover?
It explains how paddle components are prepared, processed, assembled, inspected and packed after the product specification has been approved.
Is the same process used for every paddle model?
No. The applicable materials, production stages, assembly details and checks depend on the selected paddle type, construction and order requirements.
What becomes the reference for bulk production?
The released written specification and approved sample should identify the model, dimensions, materials, construction, appearance and packaging requirements.
Which quality checks can be included?
Checks can cover dimensions, component fit, alignment, material condition, surface finish, bonding, print details and packaging. The applicable points are agreed for the project.
Can buyers specify testing requirements?
Yes. Send the required test method, condition, acceptance criteria and reporting needs with the project brief so the team can review whether they apply to the selected product.
What should we send before production planning?
Send the product family, reference model or sample, dimensions, materials, artwork, target quantity, packaging needs and any required inspection or testing points.
Production review
Send the reference your order should follow
Share the product model or sample, specification, target quantity, artwork, packing requirements and any inspection or testing points. Aaron Deng will coordinate the first manufacturing review.